FUTABA T32MZ Instruction Manual page 114

Next explanation is required when using two or more the same kind of sensors.
【Example 1 Altitude sensor × 1, Temperature sensor × 1】
A setup is unnecessary. Two sensors are packed by HUB and it connects with S.BUS2 of a receiver.
【Example 2 Altitude sensor × 1, Temperature sensor × 2】
It is unnecessary to set up one altitude sensor and one temperature sensor. Sensor registration is required for two
temperature sensors.
The sensor unit of each transmitter slot is registered and the slot number of
each sensor unit is changed automatically.
registering succeeded."
"There are not enough available slots"
"The connected sensor is not ready"
This function is used to reallocate slots to ensure that all sensors are
registered and operate as desired. As noted above, some sensors require
sensors include but are not limited to, altimeters and GPS units.
"All sensors are relocated successfully"
"Some sensors of the registered sensors cannot be found."
＜ Linkage Menu ＞
114
"The
Hub
Hub
Hub