FUTABA T32MZ Instruction Manual page 23

5. Slide and install the battery cover.
Close the battery cover so that
the wiring is not pinched.
Be sure to attach a
battery cover.
Attention to the
direction
WARNING
Be careful to not drop the battery.
Never take out the battery from the T32MZ
transmitter while the LED monitor is blinking.
* Internal settings and memories can be destroyed.
* Do not use the transmitter if a "Backup Error" warning oc-
curs. Send it to the Futaba Service Center to be checked.
Don't pull battery wiring.
*When it short-circuits, there is danger of explosion ignition.
＜ Before Use ＞
23