FUTABA T32MZ Instruction Manual page 183

VR are used as a switch) setting method is common to all functions.
Switch mode selection (Single switch/Logic switch)
screen shown below is selected. Single mode or logic mode can be selected.
The Logic switch can activate functions by the use of other switch combinations.
Up to 4 switch combinations can be set. The Logic switch can be assigned to the
airplane mode).
If using the single switch:
*The switch selection screen appears.
Logic switch
(Switch mode selection screen example)
If using the logic switch:
1.The switch mode display is changed by
pushing the mode selection button. Then
*The logic mode setting screen appears.
top of the switch on/off status display is
not shown.
method, see the section "Logic switch" below.
＜ Data ＞
183