FUTABA T32MZ Instruction Manual page 134

These are the menus usable when either airplane,
glider, or EP glider model type have been selected, and
displayed in the Model Menu screen. First use the Model
Type function of the Linkage Menu to select your model
type, wing type, and tail type. Changing these later will
reset any data set in this menu.
These dedicated mixings can be set for each flight
(Model Menu screen example)
*The Model Menu screen depends on the model type. This screen is for model type Airplane Wing Type 4AIL+4FLP.
[Airplane/glider, 2 ailerons or more]
the roll axis.
roll axis.
This mixing is used when you want to operate the rudder with aileron operation. Banking at a shallow bank
angle is possible.
[Airplane/glider, general]
This mixing is used to correct roll maneuvers, knife edge, etc. of stunt planes.
[Airplane/glider, general]
This mixing adjusts the camber and corrects the elevators.
[Airplane/glider, 2 ailerons or more]
with raised elevators.
[Airplane/glider, 2 ailerons or more]
＜ Model Menu (Airplane/Glider Functions) ＞
134
condition, as required. When you want to use the system
by switching the settings for each condition by switch or
stick position, use the Condition Select function to add