FUTABA T32MZ Instruction Manual page 130

Programmable mixing may be used to correct undesired
tendencies of the aircraft, and it may also be used for
unusual control configurations. Mixing means that the
motion of a command channel, called the "master," is
added to the motion of the mixed channel, called "slave."
You may choose to have the Masters trim added to the
The mixing curve can be changed so that the undesired
tendencies can be corrected effectively by setting the
modes. The Delay function can be programmed for each
rate. The Delay is used to change the rate smoothly when
switching. You may define Mixing ON/OFF switch,
control or you may choose to have mixing on all the
time.
After this function is activated, the
＜ Model Menu (Common Functions) ＞
130
programmed channel servo operation and may control up
to four circuits simultaneously.
The Programmable mixing includes a powerful link
function, which allows Programmable mixing to be
linked with the special mixing functions, or with other
programmable mixing functions. The link function can
be set up for Master and Slave channel individually.
selected, where the slave channel AFR and D/R settings
seconds. It is useful for landing gear control of the jet
or scale plane, etc.