FUTABA T32MZ Instruction Manual page 184

Logic switch
1.The logic selection dialogue appears when
you push the logic mode button. The 3 types
selected.
Logic combination table:
SWITCH
SW1 SW2
off off off
off on off
on off off
on on on
2. The left and right side of the switch mode
can be set to the logic switch mode as well.
In this case, a maximum of 4 switches can
be assigned to the logic switch. The left and
off status determined by the 4 switches'
combination.
In the above case, the two switches in the left
＜ Data ＞
184
(Logic switch setting screen)
switches in the right are calculated as same way.
Caution:
1. The maximum number of the logic switch is 10 for
off selection on each flight condition. The error
message will appear when the exceeded logic
switch is going to be selected. In this case, delete
logic switch.
off off
on on
on on
on off
2. The mixing on/off switch modes are automatically
assigned by single mode, not supported the
group mode.
Assigned to single mode