FUTABA T32MZ Instruction Manual page 187

use the following procedure to update the program.
Updating procedure
Note: If the battery fully discharges during program
updating, updating will fail. When the remaining
battery capacity is 50% or less, always recharge
the battery before updating.
Note: The model data in the transmitter can be used
unchanged after updating, but to be safe, back
up the model data before updating.
into the card slot.
HOME/EXIT
displayed.
2
1
T32MZ SOFTWARE UPDATE
T32MZ SOFTWARE UPDATE
T32MZ SOFTWARE UPDATE
T32MZ SOFTWARE UPDATE
If a problem occurs, an error message
will appear and the update will not be
complete.
completed, turn on the power and then
check the system program version at the
system menu information screen.
＜ Data ＞
187