Transporting Certain Frame Sizes; Types Of Construction On The Rating Plate; Storage - Siemens SIMOTICS A 1FU9 Operating Instructions Manual

5.4.2

Transporting certain frame sizes

Note
When lifting the machines for transport, only lift them in a position that corresponds to their
basic construction type.
5.4.3

Types of construction on the rating plate

The type of construction of the machine is stated on the rating plate.
If any transport locks are in place, remove them before commissioning. Store the transport locks
or disable them. Use the transport locks when transporting the motors again or reactivate the
transport locks.
The machines are packed in different ways depending on how they are transported and
their size. If not otherwise contractually agreed, the packaging corresponds to the packing
guidelines according to ISPM (International Standards for Phytosanitary Measures).
Comply with the graphic symbols provided on the packaging. Their meaning is as follows:
This
way up
5.4.4

Storage

Storing outdoors
NOTICE
Damage to the motor
Damage can occur if incorrectly stored.
Take all precautions to protect the motor under extreme climatic conditions, e.g. salt-laden
and/or dusty, moist/humid atmospheres.
Choose a dry storage location which is safe from flooding and free from vibration. Repair
any damage to the packaging before putting the equipment into storage if this is necessary
to ensure proper storage conditions. In order to ensure protection against ground moisture,
locate machines, equipment and crates on pallets, wooden beams or foundations. Prevent
1FU9
Operating Instructions, 10/2023, A5E46712792A
Fragile Protect
goods against
moisture
Protect Center of
against gravity
heat
Preparing for use
5.4 Transport and storage
Hand hooks Attach
forbidden here
41