Paths - Sony MVS-8000 User Manual

Delay setting
You can set the delay from the time of executing an operation to run the effect,
and the effect actually starting (that is, the delay until the first keyframe). You
can make this setting in the keyframe control block. (See "Time Settings" in
Chapter 13 (Volume 2).)
Note that changing the delay does not alter the duration of the effect.

Paths

The term "path" refers to the specification of how interpolation is carried out
from one keyframe to the next.
For details of the path setting procedure, see "Path Settings" in Chapter 13
(Volume 2).
Switcher path settings
Carry out path settings in the Key Frame menu.
For each menu, the following settings are available.
M/E-1 to M/E-3, and P/P menus
Item
M/E1 to M/E3, P/P All
Key1 to Key4
Bkgd/Util
Paths that can be set
For each M/E and PGM/PST, path settings for
the following items are made simultaneously.
Overall path settings for items relating to keys
1 to 4 are made simultaneously.
Key 1 All to Key 4 All
Source Key source path for keys 1 to 4
Fill Key fill path for keys 1 to 4
Proc Proc path for keys 1 to 4
Trans Transition path for keys 1 to 4
Overall path settings for items relating to
backgrounds and utility buses are made
Bkgd/Util All
simultaneously.
Bkgd A Path for background A
Bkgd B Path for background B
Util 1 Path for utility 1
Util 2 Path for utility 2
DME 2nd Video Path for video to be used for second DME
channel
159
Keyframes