Siemens SIDOOR AT40 System Manual page 182

Controllers
6.7 Parameters
FBLOCK-REF parameters
The inputs of the various F blocks can be connected or linked to any "Q" outputs (signal
sources) via the following FBLOCK-REF parameters. To this end, the number of the Q
element must be entered directly in the REF parameter (Q{0 to 38}).
Table 6- 45 FBLOCK-REF parameters
Parameter ID Name
AND
p20100 REF_AND0_IN1
p20101 REF_AND0_IN2
p20102 REF_AND0_IN3
p20103 REF_AND0_IN4
p20104 REF_AND1_IN1
p20105 REF_AND1_IN2
OR
p20106 REF_OR0_IN1
p20107 REF_OR0_IN2
p20108 REF_OR0_IN3
p20109 REF_OR1_IN1
p20110 REF_OR1_IN2
p20111 REF_OR1_IN3
NOT
p20112 REF_NOT0_IN1
p20113 REF_NOT1_IN1
XOR
p20114 REF_XOR0_IN1
p20115 REF_XOR0_IN2
FRQ
p20116 REF_FRQ0_IN1
p20117 REF_FRQ1_IN1
DELAY
p20118 REF_OnDELAY_IN1
Special
p20119 REF_ACK
p20120 REF_BATTMODE
COUNTER
p20121 REF_COUNTER_IN
p20122 REF_COUNTER_RESET Reset input of the counter (counter is reset to 0)
182
Description
Input 1 logical AND gate 0
Input 2 logical AND gate 0
Input 3 logical AND gate 0
Input 4 logical AND gate 0
Input 1 logical AND gate 1
Input 2 logical AND gate 1
Input 1 logical OR gate 0
Input 2 logical OR gate 0
Input 3 logical OR gate 0
Input 1 logical OR gate 1
Input 2 logical OR gate 1
Input 3 logical OR gate 1
Input logical NOT gate 1 (negation)
Input logical NOT gate 2 (negation)
Input 1 logical exclusive OR (XOR)
Input 2 logical exclusive OR (XOR)
Input frequency detection
Input frequency detection
ON delay
Fault acknowledgement (preceded by 5 s ON delay)
Emergency power operation (drive order is latched automatically until the next
end stop is reached)
Count input of the counter (a positive edge increments the counter)
AT40, ATD400V, ATD400K, ATD4xxW, ATD400S, ATE250S, ATD400T
System Manual, 06/2016, A2B00096162-AN