Siemens SIDOOR AT40 System Manual page 181

Parameter Name
ID
AND
p20015 DCMD_AND0_Q17
p20016 DCMD_AND1_Q18
OR
p20017 DCMD_OR0_Q19
p20018 DCMD_OR1_Q20
NOT
p20019 DCMD_NOT0_Q21
p20020 DCMD_NOT1_Q22
XOR
p20021 DCMD_XOR0_Q23
FRQ
p20022 DCMD_FRQ0_Q24
p20023 DCMD_FRQ0_Q25
p20024 DCMD_FRQ1_Q26
p20025 DCMD_FRQ1_Q27
DELAY
p20026 DCMD_OnDELAY_Q28
p20027 DCMD_OnDELAY_Q29
COUNTER
p20028 DCMD_COUNTER_Q30 Output is active as long as the counter value is 0.
p20029 DCMD_COUNTER_Q31 Output is active as long as the counter value is 1.
p20030 DCMD_COUNTER_Q32 Output is active as long as the counter value is 2.
AT40, ATD400V, ATD400K, ATD4xxW, ATD400S, ATE250S, ATD400T
System Manual, 06/2016, A2B00096162-AN
Description
Output is logically AND-combined with inputs. A discrepancy analysis of the in-
puts can be additionally activated.
Output is logically AND-combined with inputs.
Output is logically OR-combined with inputs.
Output is logically NOT-combined with inputs (negation).
Output is logically exclusively OR-combined with inputs.
Output becomes active as soon as the frequency is detected.
Output follows positive input signal delayed by the set delay time.
Controllers
6.7 Parameters
181