HW0482342
6.4
Displaying and Editing File
Operation
1
Select the application menu
under the top menu.
2
Select {FORM CUT SET-
TING FILE}.
3
Display the file of desired
condition No.
4
Select each setting item
and set.
The application menu differs depending on the robot application :
• For arc welding : {ARC WELDING}
• For handling : {HANDLING}
• For general-purpose : {GENERAL}
• For spot welding : {SPOT WELDING}
There are two methods to display the file of desired condition No.
• Call the file of desired condition No.using [PAGE].
Press [PAGE] to call the next condition No.
Press [SHIFT]+[PAGE] to call the previous condition No.
• Enter the desired condition No.
Move the cursor to the COND NO. and press [SELECT].
Enter the desired condition No. with number keys, then press
[ENTER].
6-9
6.4 Displaying and Editing File
Explanation
HW0482342