Specifying The Rotation Direction; Specifying The Rotation Angle - YASKAWA Motoman NX100 Manual

HW0482342
6.2.3

Specifying the ROTATION DIRECTION

Specify the rotational direction (cutting direction) for a form cutting motion.
Specify the direction in "ROTATION DIRECTION".
Pattern: Rectangle
6.2.4

Specifying the ROTATION ANGLE

Specify the rotational angle for the center of the cutting pattern.
Specify the angle in "ROTATION ANGLE".
Figure: Rectangle
Rotation angle: 90 degrees
Clockwise
Rotation by
90 degrees
6-5
6.2 Details of File Settings
Counterclockwise
90
degrees
HW0482342