To Change Macros - HP 1660CS-Series User Manual

To change macros

You do not need to add and delete levels just to change a level's macro. This
can be done from within the Sequence Level pop-up.
From the Trigger menu, select the sequence level number of the
1
sequence level you want to modify.
A Sequence Level pop-up appears. Its contents reflect the current macro.
Select Select New Macro.
2
The Trigger Macro pop-up replaces the Sequence Level pop-up. The macros
available depend on whether the analyzer is configured as state or timing.
Use the knob to highlight the macro you want, and select Done.
3
A new Sequence Level pop-up appears. Its contents reflect the macro you
just selected. The wording of this screen is very similar to the macro
description, and the line drawing demonstrates what the macro is measuring.
Select the appropriate assignment fields and insert the desired
4
pre-defined terms, numeric values, and other parameter fields
required by the macro. Select Done.
See Also
"Timing Trigger Macro Library" and "State Trigger Macro Library" in
Chapter 7 for a complete listing of macros.
Using the Trigger Menu
To change macros
4–9