HP 1660CS-Series User Manual page 308

Waveform display
Displayed waveforms
Display formats
Display resolution
Display modes
Normal (single)
Accumulate
Average
Overlay
Connect-the-dots
Waveform reconstruction
Waveform math
Measurement and display functions
Time markers Two vertical markers, X and O, are provided for
measurements of time and voltage. Capabilities are: measure voltage at
point where X and O markers cross each analog waveform; measure time
from trigger to X, trigger to O, and X to O; automatic marker placement
by specifying percentage of edge, edge number, and rising or falling edge
type; run until X to O > than, < than, in range, and not in range provides
selective event search; X to O statistics (mean, max, and min) provide
analysis of time interval deviation.
Supplemental characteristics (oscilloscope)
Eight waveform windows maximum, with scrolling
across 96 waveforms.
Waveforms can be displayed in an overlapping and/or
non-overlapping format. Display capability of A-B
and A+B is also provided.
500 points horizontal, 240 points vertical.
New acquisition replaces old acquisition on screen.
New acquisition is displayed in addition to previous
acquisitions until screen is erased.
New acquisitions are averaged with old acquisitions,
with the updated waveform displayed until erased.
Maximum number of averages is 256.
Up to 8 acquired waveforms from separate channels
can be overlayed in the same display area.
Provides a display of the sample points connected by
straight lines.
When there is insufficient data to fill every
horizontal location, a post acquisition reconstruction
filter fills in missing data points for time
base < 50 ns/div.
Display capability of A-B and A+B functions is
provided.
Specifications
11–11