Min And Max Scaling Fields; Markers/Range Field - HP 1660CS-Series User Manual

The Analyzer Chart Menu

Min and Max scaling fields

Min and Max scaling fields
When State is selected for the X axis, the minimum and maximum values can
range from −8192 to +8192 depending on the trace point location.
When Label is selected for either axis, the minimum and maximum values
range from 00000000hex to FFFFFFFFhex regardless of the axis, because
labels are restricted to 32 bits.

Markers/Range field

The Marker/Range field is a toggle field. If the field is set to Range, X and Y
range fields become available to set the chart minimum and maximum range
points. If the field is set to Markers, a marker selection menu appears with
marker choices available with the present analyzer configuration.
In a state analyzer with Count Off in the Trigger menu, only Pattern markers
are available. With Count Time on, Time markers and Statistics markers
become available. With Count States on, States markers are available. The
markers function just like those of the Waveform and Listing displays.
7-66