HP 1660CS-Series User Manual page 21

Logic Analyzer Overview
To make a measurement
Set up trigger*
Define terms In the Analyzer Trigger menu, define trigger variables
called terms to match specific conditions in your target system. Terms
can match patterns, ranges, or edges across multiple labels.
Configure Arming Control Use Arming Control if
•
•
•
Set up trigger sequence Create a sequence of steps that control when
the logic analyzer starts and stops storing data and filters which data it
will store. For common tasks, you can use a trigger macro to simplify the
process or use the user-defined macros to loop and jump in sequence.
You can also set the oscilloscope to trigger on a complex pattern.
See Also
Chapter 4,"Using the Trigger Menu" and Chapter 5, "Triggering Examples" for
more information on setting up a trigger.
"The Trigger Sequencer" in Chapter 9 for more information about the trigger
sequence mechanism.
"To save a configuration" and "To load a configuration" in Chapter 6 for
instructions on saving and loading the setup so you don't have to repeat
setting up the analyzer and trigger.
* If you load a configuration file, this step is not necessary.
1-6
you want to correlate the triggers and data of both analyzers
you want to use the logic analyzer to trigger an external instrument or
the built-in oscilloscope, or
you want to use an external instrument or the built-in oscilloscope to
trigger the logic analyzer.