Change A Label Name - HP 1660 Series Training Manual

Change a Label Name

Labels group channels together. You can rename a label to make it more
meaningful. For example, you could use the label name DATA for all of the
channels that are connected to the data bus of a microprocessor.
In this exercise, you will change a label name to TCOUNT to represent the
timing count data captured from the 8-bit ripple counter on the training
board. The counter counts from 0 to 255 (0 to FF in hex) repetitively.
Press the
1
2
Use the
Type TCOUNT using the keypad on the front panel of the analyzer.
3
You can use the knob or the left and right arrow keys to backspace the cursor
if you need to correct a typing error.
Press the
4
Changing a Label Name
Result
The label is now named TCOUNT, which represents timing count.
MENU key.
Format
keys (⇑ ⇓ ⇐ ⇒) to highlight
arrow
key.
Done
Get other manuals https://www.bkmanuals.com
Introduction to Timing Analysis
Change a Label Name
Lab1.
2-5