Shade Adjustments - HP 1660CS-Series User Manual

System Utilities

Shade adjustments

Select Update FLASH ROM.
3
The analyzer warns, "Selecting Continue Will Erase & Update Flash ROMs."
and waits for you to select Cancel or Continue. If you select Continue, the
analyzer will be reset. If you need to save the measurement data, select
Cancel.
Select Continue.
4
The screen goes black and the analyzer performs its power-up self tests. It
then displays a message listing the required files and provides further
instructions.
Insert the update disk into the flexible disk drive.
5
To search only the flexible disk drive, press the Done key. To search
6
the flexible disk drive and then the hard drive, press any other key.
If you press a key other than Done, the logic analyzer will not pause for you
to insert the second disk when it finishes copying files on the first disk.
Instead, it will look on the hard drive under the /SYSTEM directory. If it finds
copies of the operating system files on the hard drive, those are used instead.
This could result in incorrect installation of the updated operating system.
The logic analyzer warns, "We are about to erase flash ROM memory." This is
the last point at which you can cancel the operation. Any loss of power
between the time the analyzer starts to erase flash ROM and the time it
finishes copying the update will destroy the operating system.
If you do not have the required files turn off the analyzer immediately.
C A U T I O N
Pressing any key will destroy the operating system.
If you are sure you are ready to continue, press any key.
7
When the analyzer has completed the update, press any key.
8
The screen goes black and the analyzer reboots. You have finished updating
the flash ROM and the new operating system is in place. It is now safe to
turn off the logic analyzer.
Shade adjustments
You can adjust the greys of the display to different levels of intensity. Select
the shade number, then select luminosity and adjust it with the knob. Default
Shades restores all shade intensity levels to the original factory settings.
7-30