HP 1660CS-Series User Manual page 132

Connecting Probe Cables to the Logic Analyzer
All probe cables are installed at Hewlett-Packard. If you need to replace a
probe cable, refer to the HP 1660CS/CS-Series Logic Analyzers Service
Guide, available from your HP sales office.
Connecting the Probe Tip Assembly to the Probe Cable
To connect a probe tip assembly to a cable, align the key on the cable
connector with the slot on the probe housing and press them together.
Probe tip assembly
Probe cable
key
Connecting probe tip assembly
Probing
Assembling the probing system
7-13