Honeywell Galaxy Flex Installer Manual page 222

Appendix G: Peripherals
Signal Strength
Ensure that the signal strength for the chosen network is at least 30% .
Programming
Program the module using the GPRS [56.4] and GSM [56.5] menu options.
Remote Servicing connections
If the GSM module is to be used for Remote servicing please note that a suitable GSM
modem must be used on the PC running the RSS or UMS software. A modem such as the
Sierra Wireless Fastrack is suitable. Communication over GSM will be significantly slower
than PSTN. Using the GPRS channel and an Ethernet link to the PC will allow faster
communications.
Characteristics
The following table shows the technical characteristics of the GSM module:
GSM fault detection
Service temperature
Storage temperature
Dual band
Power
Antenna
SIM card
Compliance
This product is suitable for use in systems designed to comply with EN50131-1 and
PD6662:2004.
Security Grade – 2
Environmental Class – II
Alarm Transmission System – 2
222
Dedicated internal GSM fault code is triggered by the lack of a
network
0 deg to 40 deg C
-20 deg to +70 deg C
GSM 900 MHz and DCS 1800 MHz
2 W (GSM)/ 1W (DCS)
Supplied
Micro
Galaxy Flex Installer Manual