Honeywell Galaxy Flex Installer Manual page 141

Galaxy Flex Installer Manual
Ethernet/GPRS [56.4]
û 01 = Module Config
û 1 = IP Address
û 2 = Site Name
û 3 = Gateway IP
4 = Network Mask
û 02 = Alarm Reporting
û 1 = Format
û 2 = Primary IP (1 = IP Address, 2 = Port No.)
û 3 = Secondary IP (1 = IP Address, 2 = Port No.)
û 4 = Account No.
û 5 = Receiver (1 = Single, 2 = Dual)
û 6 = Alarm Mon.
û 7 = Heartbeat – 1 = Interval
8 = Protocol (0 = UDP, 1 = TCP)
û 03 = Remote Access
û 1 = Access Period
2 = Mode
Continued on next page
û 1 = SIA (0-4)
û 1 = Trigger (1 = Status, 2 = Groups)
2 = Group Setting
2 = Microtech (Same as SIA format)
û 1 = Trigger (1 = Status, 2 = Groups)
û 2 = Account No.
û 3 = IP Address
4 = Port No.
û 1 = Off
û 2 = All Unset
û 3 = Any Set
4 = Any Time
û 1 = Direct Access
2 = Manager Authorize
û 1 = Call Back IP1 (1 = IP Address, 2 = Port No.)
û 2 = Call Back IP2 (1 = IP Address, 2 = Port No.)
û 3 = Call Back IP3 (1 = IP Address, 2 = Port No.)
û 4 = Call Back IP4 (1 = IP Address, 2 = Port No.)
5 = Call Back IP5 (1 = IP Address, 2 = Port No.)
Communications [56]
û 1 = Account No.
û 2 = IP Address
3 = Port No.
141