Rear Ports Mode Configuration - Avaya 3500 Series Getting Started

Name
RecurringOffset

Rear ports mode configuration

Use the procedures in this section to display and configure the rear ports operational mode for a
standalone switch or a stack.
Configuring the rear ports mode
Use this procedure to display and configure the rear ports operational mode for a standalone switch
or a stack.
Procedure
1. From the Device Physical View, select a unit.
2. In the navigation tree, double-click Edit.
3. From the Edit tree, click Unit.
4. In the work area, select the Rear Ports Mode tab.
5. In the RearPortAdminMode section, click a radio button.
Important:
A switch restart is required in order for the operational mode to take effect.
Rear Ports Mode field descriptions
The following table describes the fields on the Rear Ports Mode tab.
Name
RearPortAdminMode
RearPortOperMode
July 2015
Description
Specifies the time in minutes by which you want to
change the time when recurring daylight savings
begins and ends. The offset is added to the current
time when daylight savings time begins and
subtracted from the current time when daylight
savings time ends.
Description
Specifies the rear ports operational mode. Values
include:
• standalone: selects the standalone operational
• stacking: selects the stacking operational mode
DEFAULT: standalone
Displays the configured operational mode of the rear
ports.
Comments on this document? infodev@avaya.com
Configuring the switch using EDM
mode for the rear ports
for the rear port
Getting Started with Avaya ERS 3500 Series
137