Remote Access Setting field descriptions
The following table describes the fields on the Remote Access Setting tab.
Name
Telnet Remote Access Setting
SNMP Remote Access Setting
Web Page Remote Access Setting
SSH Remote Access Setting
Configuring IP Office script using EDM
Use the following procedure to configure IP Office in default or verbose mode using run scripts.
Note:
When executing the script using EDM, do not run other commands while the script is in
progress, because this slows down the execution. EDM can time-out while waiting for a
response; even when a time-out occurs, the script execution continues on the switch.
Procedure
1. From the navigation tree, double-click Administration.
2. In the Administration tree, double-click Run Scripts.
The IP Office Script work area displays.
3. In the Mode work area, from the Run Script Mode dialog box, select default to execute the
script in the default mode or select verbose to modify the predefined values.
July 2015
Description
Specifies the remote access settings for telnet
sessions:
• Access: Allows or disallows telnet access to the
• Use List : Enables (Yes) or disables (No) the use
Specifies SNMP remote access settings:
• Access: Allows or disallows SNMP access to the
• Use List : Enables (Yes) or disables (No) the use
Specifies web page remote access settings
• Use List: Enables (Yes) or disables (No) the use
Specifies SSH access settings:
• Access: Allows or disallows SSH access to the
• Use List : Enables (Yes) or disables (No) the use
Comments on this document? infodev@avaya.com
Configuring the switch using EDM
switch
of listed remote Telnet information.
switch
of listed remote SNMP information.
of listed remote web page information.
switch
of listed remote SSH information.
Getting Started with Avaya ERS 3500 Series
119