Displaying System Information - Avaya 3500 Series Getting Started

show cli {info | list | mode | password [type | unit <1–8>]}
Example
The following figure provides a sample of the show cli command.
switch>show cli info
Inactivity Timeout:
Login Timeout: 1 minute(s)
Login Retries: 3
More: True
Screen Lines: 23
Variable definitions
The following table describes the parameters for the show cli command.
Variable
info
list
mode
password [type]
password [unit <1–8>]

Displaying system information

Display the current system characteristics.
Important:
You must enable and configure SNTP to display GMT time. Refer to
Protocol (SNTP)
Procedure
1. Enter Privileged EXEC mode:
enable
2. At the command prompt, enter the following command:
show sys-info
July 2015
15 minute(s)
on page 69 for more details.
Comments on this document? infodev@avaya.com
Configuring the switch using ACLI
Value
Displays general Console settings
Lists CLI tree
Displays information about current ACLI mode
Displays the current password type configured for
serial console and Telnet access to the stack, or
standalone switch. Values include:
• local — the system local password is used
• none — no password is used
• radius — RADIUS password authentication is used
• tacacs — TACACS+ AAA services are used
Displays current ACLI user names and passwords
for a specific unit or all units.
Simple Network Time
Getting Started with Avaya ERS 3500 Series
63