Configuring System Parameters Using Edm - Avaya 3500 Series Getting Started

Configuring the switch using EDM
Variable
FlowControlAdminMode
FlowControlOperMode
AutoNegotiationCapability
AutoNegotiationAdvertisements
Mltd
IsPortShared
PortActiveComponent

Configuring system parameters using EDM

Use this procedure to view and modify the system level configuration.
Procedure
1. In the navigation tree, click Edit.
2. In the Edit tree, click Chassis.
3. In the Chassis tree, click Chassis.
4. In the work area, click the System tab.
5. In the sysContact dialog box, type system contact information.
Getting Started with Avaya ERS 3500 Series
124
Value
Specifies the flow control mode of the port. Values
include:
• disabled — flow control disabled
• enabledXmit — transmit enabled
• enabledRcv — receive enabled
• enabledXmitAndRcv — transmit and receive
Indicated the current flow control mode of the port.
Indicates the current auto negotiation capability of
the port.
Specifies the custom auto negotiation
advertisements of the port Values include:
• 10Half
• 10Full
• 100Half
• 100Full
• 1000Half
• 1000Full
• 10000Full
• PauseFrame
• AsymmPauseFrame
Indicates the MultiLink Trunk assigned to the port.
Indicates whether the port is shared.
Indicates the port components active for a shared
port.
Comments on this document? infodev@avaya.com
enabled
July 2015