Assembling - Siemens Sinumerik 828D Manual

Anschließbare Komponenten
7.9 PP 72/48D 2/2A PN
Name Designation
H5 DIAG2
H6 OVTemp
Note
When the system is booting, LEDs H1, H2 and H3 are lit.
7.9.2

Assembling

Mounting
The I/O module is screwed with a mounting plate to the control cabinet wall in the control
cabinet. The module must be installed according to EN 60204.
Protection against electric shock
A protective conductor must be connected using the grounding screw.
Mounting versions:
● Portrait mounting at the lateral strap of the mounting plate (2x M5 or M6 screws).
● Flat mounting at the rear wall of the mounting plate (4x M5 or M6 screws).
216
Color Description
Green Reserved
Red Overtemperature indication
WARNING
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4