Name
H5
H6
Note
When the system is booting, LEDs H1, H2 and H3 are lit.
7.8.2
Assembling
Mounting
The I/O module is screwed with a mounting plate to the control cabinet wall in the control
cabinet. The module must be installed according to EN 60204.
Protection against electric shock
A protective conductor must be connected using the grounding screw.
Mounting versions:
● Portrait mounting at the lateral strap of the mounting plate (2x M5 or M6 screws).
● Flat mounting at the rear wall of the mounting plate (4x M5 or M6 screws).
PPU and components
Manual, 10/2015, 6FC5397-2DP40-5BA3
Designation
Color
DIAG2
Green
OVTemp
Red
WARNING
7.8 PP 72/48D PN and PP 72/48D 2/2A PN
Description
Reserved
Overtemperature display
Connectable components
201