Connection - Siemens Sinumerik 828D Manual

Anschließbare Komponenten
7.6 Electronic handwheel
7.6.2

Connection

Electrical connection diagram
The handheld handwheel is connected via a flange socket using the spiral connection cable.
You will find article numbers for the recommended flange socket in Chapter Spare parts and
accessories (Page 178).
Note
If a connected handwheel triggers pulses while in the idle position or when there is only minimal
contact, connect it the opposite way round to what is stated on the label.
Swap:
● The wires of terminal A with those of terminal /A
● The wires of terminal B with those of terminal /B
176
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4