Mcp 310C Pn - Siemens Sinumerik 828D Manual

7.4

MCP 310C PN

Description
The 310C PN machine control panel enables user-friendly operation of the machine functions.
It can be used in the SINUMERIK 828D for machine-related operation of machine tools.
All keys are designed with replaceable caps for machine-specific adaptations. The key caps
can be freely inscribed using laser. Clear key caps can be used as an alternative.
The machine control panel is mounted from the rear with special tension jacks supplied with
the panel.
Operator controls
● Operating mode and function keys:
– 49 keys with assigned LEDs
– Direction keys for milling machines with rapid traverse override (key covers for direction
– Key type: mechanical short-stroke keys
● Feed control with override feed/rapid traverse (rotary switch with 23 positions)
● Key-operated switch (four positions and three different keys)
Interfaces
● PLC I/O Interface (data transmission rate: 100 Mbit/s)
● Nine customer-specific inputs (e.g. for illuminated pushbuttons)
● Six customer-specific outputs
● Handwheel connection
Expansion slots
Six slots for control devices (d = 16 mm)
Additional cable set required for control devices: Spare parts and accessories (Page 153)
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4
keys for turning machines are supplied)
Anschließbare Komponenten
7.4 MCP 310C PN
137