Operator Controls And Display Elements - Siemens Sinumerik 828D Manual

7.3.1

Operator controls and display elements

Operator controls (front)
①
Emergency-Stop button
②
Installation locations for control devices (d = 16 mm)
③
Reset button
④
Program control
⑤
Operating modes, machine functions
⑥
User keys T1 to T15
⑦
Direction keys with rapid traverse override (R1 to R15)
⑧
Spindle control with override switch
⑨
Feed control with override switch
⑩
Keyswitch (four positions)
Figure 7-11 Position of control elements on MCP 483C PN
Mounting slots for control devices
The openings for installing control devices
PN" Fig. must not be broken out (risk of damage) but carefully drilled to the required width.
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4
WARNING
Anschließbare Komponenten
②
in "Position of control elements of MCP483C
7.3 MCP 483C PN
121