Anschließbare Komponenten
7.2 MCP 310 USB
Printed slide-in labels are included in the accessory pack for labeling key groups for operation
in milling machines and lathes. You can individually label the customer keys, see Section Spare
parts and accessories (Page 118). Blank slide-in labels are included in the accessory pack.
Emergency Stop circuit
As a rule, when operating the Emergency Stop button, all drives are brought to a standstill with
max. braking torque. Turn the Emergency Stop button counter-clockwise to release it.
7.2.2
Mounting
Installation and mounting
The recommended machine control panel mounting is shown in the following diagram:
108
EMERGENCY STOP
Press the Emergency Stop button in the following situations:
● When persons are at risk.
● When there is a risk of the machine or workpiece being damaged.
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4