Siemens Sinumerik 828D Manual page 201

Pin assignment
Table 7-70
Pin
1
2
3
4
5
6
7
8
LED displays
For diagnostic purposes, the RJ45 sockets are each equipped with a green and a yellow LED.
This allows the following information on the respective PROFINET port to be displayed:
Table 7-71
Name
Link
Activity
PROFINET address (S1)
The right logical address must be assigned to the I/O module for communication with PLC I/O
interface using the 10 bit DIP switch S1.
Table 7-72 Switch S1 settings
1 2 3 4
ON OFF OFF ON
OFF OFF OFF ON
ON ON ON OFF
OFF ON ON OFF
ON OFF ON OFF
The device name consists of the PROFINET name and the device number: in the case of I/O modules, the 1st module is device
number 9.
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4
Pin assignment - PROFINET X2, Port 1 and Port 2
Signal name Signal type
TX+ O
TX- O
RX+ I
N.C. -
N.C. -
RX- I
N.C. -
N.C. -
PROFINET ports LED displays
Color Status
Green Lit
Off
Yellow Lit
Off
5 6 7 8
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
Meaning
Transmit data +
Transmit data -
Receive data +
Not assigned
Not assigned
Receive data -
Not assigned
Not assigned
Meaning
100 Mbit link available
Missing or faulty link
Sending or receiving
No activity
9 10 Device name
ON ON
pp72x48pn9
pp72x48pn8
pp72x48pn7
pp72x48pn6
pp72x48pn5
Anschließbare Komponenten
7.8 PP 72/48D PN
Meaning
1st PP module
2nd PP module
3rd PP module
4th PP module
5th PP module
201