Operator Controls And Displays - Siemens Sinumerik 828D Manual

7.2.1

Operator controls and displays

Operator controls (front)
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
Figure 7-6
NOTICE
Slots for control devices
Do not break out the openings for mounting control devices (risk of damage), rather drill them
to the required width.
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4
Slot for the Emergency Stop button
JOG and reference point keys
Display for the tool number
Slots for control devices (d = 16 mm, e.g. switch)
Drill mounting holes to install control devices.
Reset button
Keys for operating modes, machine functions and program control
Customer keys
Direction keys with rapid traverse override for lathes and milling machines
Override switch for the spindle
Override switch for the feed control
Keys for spindle control
Keys for feed control
Key for the coolant
Position of operator controls
Anschließbare Komponenten
7.2 MCP 310 USB
107