Anschließbare Komponenten
7.7 Mini handheld unit
● Adapter plate
To install the metal flange socket in the location for plastic flange sockets, an adapter plate
is available.
Figure 7-41
● Holder
The mini HHU can be stored in a screw-on holder; this enables safe storage even on non-
magnetic surfaces. The holder is secured with three M4 screws.
Figure 7-42
● Slide-in labels
You can replace the slide-in labels. To do this, you must release the six Torx screws at the
rear of the housing. The housing can now be taken apart. You can now withdraw the slide-
in labels out of the guide on the front panel and replace them.
Make sure that no connecting cables are pinched or crushed when reassembling.
184
Dimension drawing of the adapter plate
Dimension drawing of the holder
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4