Sentron Pac3200/Pac4200 - Siemens Sinumerik 828D Manual

9.4

SENTRON PAC3200/PAC4200

Description
Figure 9-4
The SENTRON PAC measuring devices ensure precise, reproducible and reliable
measurement of energy values for infeed, outgoing feeders or individual loads. They not only
supply comprehensive information about your electrical installation and power distribution
system, but also provide important measured values to help you assess the status of your
system and the power quality. For further processing of the measurement data, the devices
are equipped with a wide range of communication options for easy integration into higher-level
automation and power management systems. They can be used for both single-phase and
multi-phase measurements in 3- and 4-conductor power supply systems (TN, TT, IT).
For communication between the PPU and the SENTRON PAC you require the switched
Ethernet PROFINET module, article number: 7KM9300-0AE00-0AA0.
Technical data
Parameter
Article number
Suitable for TN, TT and IT systems
Continuous signal acquisition
Measuring inputs for voltage
3 AC; UL-L/UL-N; CAT III
● Wide-range power supply
Measuring inputs for voltage
3 AC; UL-L/UL-N; CAT III
● Low-voltage power supply
Measurement at voltage transformers for
voltages > 500 V / 690 V
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4
SENTRON PAC3200
9.4 SENTRON PAC3200/PAC4200
SENTRON PAC3200
7KM2112-0BA00-3AA0
✓
✓
Max. 690 V / 400 V
95 to 240 V AC 50/60 Hz ±10 %
110 to 340 V DC ±10 %
Max. 500 V / 289 V
22 to 65 V DC; ±10%
✓
Spare parts and accessories
SENTRON PAC4200
7KM4212-0BA00-3AA0
✓
✓
✓
269