Siemens Sinumerik 828D Manual page 249

Mounting aids
Figure 7-61
Mounting an NX10.3 on an Active Line Module
Procedure:
1. Remove the spacers from the NX.
2. Position the NX on the left-hand side of the Line Module. The mounting fixtures fit exactly
in the five cutouts on the NX.
3. Push the two units together.
4. Press down on the NX until it engages and is securely connected to the Line Module.
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4
NX10.3 mounting aids
Anschließbare Komponenten
7.10 NX10.3
249