Avaya Vantage K175 Installing And Administering page 50

Security configuration
Parameter
TLS_VERSION
AUTH
FILE_SERVER_URL
SSH_ALLOWED
ADBSTAT
SCEP parameters
Configure the following Simple Certificate Enrollment Protocol (SCEP) parameters.
Parameter
MYCERTURL
MYCERTCN
MYCERTDN
September 2018
Set to Description
established connection. If it does not match, the
connection is dropped.
0 or 1 Specifies which TLS versions are supported with all TLS
connections used by Android and Avaya applications.
Assign one of the following values:
• 0: TLS versions 1.0 and 1.2 are supported.
• 1: TLS version 1.2 only is permitted.
1 Ensures usage of HTTPS file servers for configuration
and software files downloads. Once AUTH is set to 1 and
the device downloads the trusted certificates, the device
can only download files from the HTTPS server with
certificates that can be validated using the trusted
certificate repository.
The address of Assigns HTTPS or TLSRVR file servers.
your HTTPS file
server
0 Keeps Secure Shell (SSH) disabled.
0 Keeps Android Debug Bridge (ADB) disabled.
Type Default Description
value
String Null Specifies the URL to access the SCEP server. The
device attempts to contact the server only if this
parameter is set to other than its default value.
String $SERIA Specifies the Common Name (CN) for SUBJECT in the
LNO SCEP certificate request. The values can either be
$SERIALNO or $MACADDR.
If the value includes the string $SERIALNO, that string
will be replaced by the serial number of the phone.
If the value includes the string $MACADDR, that string
will be replaced by the media access control (MAC)
address of the phone.
String Null Specifies the common part of SUBJECT in the SCEP
certificate request. This value defines the part of
SUBJECT in a certificate request including
Organizational Unit, Organization, Location, State, and
Country that is common for requests from different
devices.
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Table continues...
™
50