Avaya Vantage K175 Installing And Administering page 128

Supported configuration parameters
Parameter
ICMPRED
MTU_SIZE
NETWORK_MODE Numeric
September 2018
Type Default Is set to
value default
on reset
Integer 0 Yes
Integer 1500 Yes
1 Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
Specifies whether Avaya Vantage
redirect messages. Assign one of the following
values:
™
• 0: Avaya Vantage does not process received
redirect messages.
™
• 1: Avaya Vantage processes received redirect
messages according to
This parameter is supported in all modes.
For provisioning, use:
• A name=value pair in a DHCPACK message.
• The SET command in the 46xxsettings.txt
file.
Specifies the Maximum Transmission Unit (MTU)
size. Assign one of the following values:
• 1496
• 1500
This parameter is applicable for wired Ethernet
connections only and is not used for Wi-Fi. Avaya
™
Vantage uses MTU_SIZE to provide compatibility
with Ethernet switches that do not support the
longest maximum frame length possible with tagged
frames.
This parameter is supported in all modes.
For provisioning, use:
• A name=value pair in a DHCPACK message.
• The Option 26 value in the DHCPACK message.
• The SET command in the 46xxsettings.txt
file.
Specifies the active network interface. The available
options are:
• 1: Wired Ethernet connection is active.
• 2: Wi-Fi connection is active.
This parameter is supported in all modes.
For provisioning, use the Settings > Network >
Network mode menu on the device.
™
™
processes ICMP
RFC 1122.
Table continues...
128