Avaya Vantage K175 Installing And Administering page 142

Supported configuration parameters
Protocol-specific parameters
Certificates configuration parameters
Parameter
TRUSTCERTS
MYCERTURL
MYCERTCN
September 2018
Type Default Is set to
value default
on reset
String null Yes
string
String null Yes
string
String $SERIA Yes
LNO
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
Specifies file names of trusted certificates, which
are used for authentication.
If you are providing several file names, use commas
to separate them. You can upload up to 100 trusted
certificates on Avaya Vantage
length of the parameter value is 1024 symbols.
™
Avaya Vantage supports both the PEM and DER
file formats.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies a URL of the Simple Certificate
Enrollment Protocol (SCEP) server. Avaya
™
Vantage attempts to contact the server if the
parameter value is not the default.
A valid URL must start with http://.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies the Common Name (CN) for SUBJECT in
a SCEP certificate request.
If the parameter value contains the $SERIALNO
™
string, Avaya Vantage replaces this string with the
device serial number.
If the parameter value contains the $MACADDR
™
string, Avaya Vantage replaces that string with the
device MAC address.
Note:
The parameter value must not contain the *
symbol. If the parameter value contains this
symbol, Avaya Vantage
to be invalid.
This parameter is supported in all modes.
™
™
. The maximum
™
considers the value
Table continues...
142