Avaya Vantage K175 Installing And Administering page 172

Supported configuration parameters
Parameter
XFERSTAT
POUND_KEY_AS_
CALL_TRIGGER
Audio parameters
Parameter
ADMIN_CHOICE_
RINGTONE
September 2018
Type Default Is set to
value default
on reset
Numeric 1 Yes
Numeric 1
Type Default Is set to
value default
on reset
String Default Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies whether the Call transfer button is
available to users. Avaya Vantage
this parameter if CCBTNSTAT is set to 1.
Assign one of the following values:
• 0: The Call transfer button is disabled.
• 1: The Call transfer button is enabled.
For provisioning, use the SET command in the
46xxsettings.txt file.
In off-hook dialing, specifies whether:
• Pressing the pound key (#) triggers a call.
• The pound key is considered a dialed digit.
Assign one of the following values:
• 0: The pound key is considered a dialed digit.
• 1: The pound key triggers a call.
In the IP Office environment, set
POUND_KEY_AS_CALL_TRIGGER to 0.
For provisioning, use the SET command in the
46xxsettings.txt file.
Description
Specifies the ring tone that Avaya Vantage
uses for incoming calls.
When the parameter is set to "Default", the Avaya
built-in ringtone is used for incoming calls.
Otherwise, you can specify the name of one of the
ringtones available on the device.
For provisioning, use the SET command in the
46xxsettings.txt file.
™
™
Basic ignores
™
Basic
172