Avaya Vantage K175 Installing And Administering page 131

Parameter
WIFI_CON_STATU
S_ON_LOGOUT
ADBSTAT
GRATARP
September 2018
Type Default Is set to
value default
on reset
Numeric 1 Yes
Numeric 1 Yes
Integer 0 Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies whether Avaya Vantage
information about wireless connections after logout.
™
• 0: Avaya Vantage deletes information about Wi-
Fi connections, such as Wi-Fi passwords.
™
• 1: Avaya Vantage keeps information about Wi-Fi
connections and the active wireless connection,
such as Wi-Fi passwords.
This parameter is not supported in the non Avaya
™
Breeze CSDK application based mode.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies whether Android Debug Bridge (ADB) is
enabled.
• 0: ADB is disabled and the option to enable ADB
from the Settings menu of the device is disabled.
• 1: ADB is disabled, but you can enable it from the
Settings > Developer options > Debugging
menu.
Since ADB is a non-secure protocol, Avaya
recommends that you enable ADB for Android
application development only. Otherwise, set
ADBSTAT to 0.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies whether an existing Address Resolution
Protocol (ARP) cache entry is updated with a MAC
address received in a gratuitous ARP message.
Assign one of the following values:
™
• 0: Avaya Vantage ignores gratuitous ARP
messages.
™
• 1: Avaya Vantage uses gratuitous ARP
messages to update the existing ARP cache
entry.
This parameter is supported in all modes.
™
Network settings
™
keeps
Table continues...
131