Avaya Vantage K175 Installing And Administering page 148

Supported configuration parameters
Parameter
EASG_SITE_AUT
H_FACTOR
Captive Portal
Parameter
CAPTIVE_PORTA
L_SERVER
September 2018
Type Default Is set to
value default
on reset
String null Yes
string
Type Default Is set to
value default
on reset
String connecti Yes
vitychec
k.gstatic
.com
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
not have access to the Avaya network to generate
EASG responses for SSH login.
The value of the parameter is a list of file names
separated by commas without any spaces between
entries. The value can contain up to 255 ASCII
characters.
To delete the EASG trusted certificate from the
device, remove the corresponding file name from
EASG_SITE_CERTS.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies the EASG site authentication factor code
associated with the EASG site certificate. The value
of the parameter can contain from 10 to 20
alphanumeric characters.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Description
Specifies the URL of the captive portal server for
HTTP authentication to use the Internet. Use the
[http://]hostname[:port][/path] format,
where:
• hostname is either an IP address in the dotted
decimal format or a domain name.
• port is an optional port number.
• path is an optional path to the server.
If you want to disable the detection mechanism, use
the null string as the parameter value.
This parameter is supported in all modes.
For provisioning, use:
• DHCP option 242.
• The SET command in the 46xxsettings.txt
file.
™
148