Avaya Vantage K175 Installing And Administering page 126

Supported configuration parameters
Parameter
ROUTER
NETMASK
SUBNET
USE_DHCP
September 2018
Type Default Is set to
value default
on reset
String 0.0.0.0 Yes
String 0.0.0.0 Yes
String 0.0.0.0 Yes
Numeric 1 Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
• For provisioning, use the Settings > Network >
Ethernet > IP interface > Static IP settings
menu on the device.
Specifies an IP address or a list of addresses of
default routers or gateways in the IP network.
Entries in the list are separated by commas without
any spaces between entries. The parameter can
contain up to 127 characters.
This parameter is supported in all modes.
For provisioning, use:
• The Option 3 value in a DHCPACK message.
• For provisioning, use the Settings > Network >
Ethernet > IP interface > Static IP settings
menu on the device.
Specifies an IP subnet mask.
This parameter specifies one IP address in the
dotted decimal format. The range is from 7 to 15
ASCII characters.
This parameter is supported in all modes.
For provisioning, use:
• The Option 1 value in a DHCPACK message.
• For provisioning, use the Settings > Network >
Ethernet > IP interface > Static IP settings
menu on the device.
Specifies the subnet of the telephone. A value of
SUBNET is a value of a bitwise AND operation
performed on values of IPADD and NETMASK.
This parameter is supported in all modes.
The parameter can be used in conditional
statements in the 46xxsettings.txt file.
Specifies whether Avaya Vantage
address or receives the IP address through DHCP.
The options are:
• 0: Use a static IP address configured on the
device.
• 1: Obtain the IP address automatically through
DHCP.
™
™
uses a static IP
Table continues...
126