Supported configuration parameters
Parameter
MYCERTREPLAC
E
ENABLE_PUBLIC_
CA_CERTS
September 2018
Type
Default
Is set to
value
default
on reset
Numeric
90
Yes
Numeric
0
Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
If the value contains $SERIALNO, $SERIALNO is
replaced with the value of SERIALNO. If the value
contains $MACADDR, $MACADDR is replaced with
the value of MACADDR without the colon
separators.
This parameter is supported in all modes.
For provisioning, use:
• The SET command in the 46xxsettings.txt
file.
• The Settings menu on the device.
Specifies the period of the certificate's validity
interval. This period is specified as a percentage.
™
Avaya Vantage
uses this percentage to calculate
the date of the certificate replacement before its
expiration. When the configured period is over,
™
Avaya Vantage
tries to download the newest
version of the certificate from the SCEP server.
The range is from 1 to 99.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies whether embedded Android trusted
certificates are used by the trusted certificate
repository for file download using HTTPS, Avaya
®
Aura
Device Services, 802.1x, EAP-TLA, SCEP,
and PPM.
You can assign one of the following values:
• 0: The services do not use Andriod trusted
certificates.
• 1: The services use Android trusted certificates.
In the following cases, this parameter is enforced to
1 even if it was configured as 0:
™
• When Avaya Vantage
Enrollment Services environment.
™
• When Avaya Vantage
server address from a redirect from Device
Enrollment Services.
™
is installed in a Device
obtains the provisioning
Table continues...
144