Avaya Vantage K175 Installing And Administering page 129

Parameter
IPV6STAT
BLUETOOTHSTAT
BLUETOOTH_FEA
TURES_SHARED_
VIA_STAT
TRUST_AGENTS_
STAT
September 2018
Type Default Is set to
value default
on reset
Numeric 1
Integer 1 Yes
Integer 0 Yes
Integer 1 Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
Controls whether Avaya Vantage
incoming and outgoing IPv6 traffic.
™
For Avaya Vantage , set this parameter to 0 to
block IPv6 traffic because Avaya Vantage
support IPv6.
This parameter is applicable for both wired Ethernet
and wireless connections.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies whether Bluetooth is allowed for user
configuration. Assign one of the following values:
• 0: Bluetooth and the Bluetooth menu are
disabled in Settings on the device. The user
cannot enable Bluetooth.
• 1: Bluetooth and the Bleutooth menu are enabled
in Settings on the device. The user can enable or
disable Bluetooth.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies whether users have access to Shared via
Bluetooth options in the Setting menu on the
device.
• 0: Users cannot use Shared via Bluetooth.
• 1: Users can use Shared via Bluetooth.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies whether users can configure trust agents.
• 0: Users cannot access Trust agents in the
Settings menu. All trust agents are disabled.
• 1: Users can access Trust agents in the Settings
menu. Users can enable or disable the available
trust agents
This parameter is supported in all modes.
™
Network settings
™
blocks all
™
does not
Table continues...
129