Avaya Vantage K175 Installing And Administering page 143

Parameter
MYCERTDN
MYCERTKEYLEN
MYCERTCAID
SCEPPASSWORD
September 2018
Type Default Is set to
value default
on reset
String Null Yes
Integer 2048 Yes
String CAIdenti Yes
fier
String $SERIA Yes
LNO
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Other operational parameters and settings
Description
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies the common part of SUBJECT in a SCEP
certificate request. This value defines the part of
SUBJECT that is common for requests from
different devices, such as Organizational Unit,
Organization, Location, State, and Country.
The parameter value must start with the slash (/)
symbol.
Note:
Do no use the asterisk (*) symbol. If the value
contains this symbol, Avaya Vantage
considers the value to be invalid.
For example: /C=US/ST=CA/L=MILPITAS/
O=Avaya
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies the RSA private key length in bits. The
private key is used on the device for certificate
enrollment. Avaya Vantage
with a length of 2048 bits.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies the Certificate Authority Identifier (CAI).
Certificate Authority servers might require a specific
CAI string in order to accept GetCA requests. If
™
Avaya Vantage works with such a Certificate
Authority, the CA identifier string must be set
through this parameter.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies a password to use with SCEP.
The non-null value of SCEPPASSWORD is
included in a challengePassword attribute in SCEP
certificate signing requests.
™
™
™
only supports keys
Table continues...
143