Supported configuration parameters
Parameter
PHONE_LOCK_PA
SSWORD_FAILED
_ATTEMPTS
LOCK_SCREEN_L
OCK_AFTER_TIM
EOUT
ALLOW_LOGOUT
_WHEN_LOCKED
September 2018
Type
Default
Is set to
value
default
on reset
Numeric
8
Yes
Numeric
5
Yes
Numeric
1
Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Description
Display > Sleep menus. By default, the
Automatically lock and Sleep fields have the
following options: 1, 2, 5, 10, 30 minutes, 1 hour, 2
hours, 5 hours, 10 hours, 1 day, 2 days, and 1
week. The minimum value is 1 minute. The
maximum value is the minimum value between the
PHONE_LOCK_IDLETIME value and the value
specified by the Exchange policy.
For example, if the PHONE_LOCK_IDLETIME
value is 145 and the value specified by the
Exchange policy is 123 minutes, then the
Automatically lock field provides options from 1
minute to 2 hours inclusively.
This parameter is not supported in the non Avaya
™
Breeze
CSDK application based mode.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies the number of failed login attempts before
™
Avaya Vantage
becomes locked.
The range is from 8 to 20. If the parameter set to 0,
then the number of failed attempts is unlimited.
This parameter is not supported in the non Avaya
™
Breeze
CSDK application based mode.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies the Lock screen inactivity timeout in
minutes. The range is from 1 to 10080.
This parameter is not supported in the non Avaya
™
Breeze
CSDK application based mode.
For provisioning, use the Settings menu on the
device.
Specifies whether users can log out from the Lock
screen. Assign one of the following values:
• 0: A user cannot perform logout when the device
is locked.
• 1: A user can perform logout from the Lock
screen.
• 2: When device is locked, an administrator can
perform logout through the Settings menu only. In
addition, the logout option is available only for
™
Table continues...
160