Avaya Vantage K175 Installing And Administering page 98

Troubleshooting
Avaya Vantage
6. Select one of the following options:
• Reboot: Stops the boot recovery procedure and reboots the device.
• Clear phone : Resets the device to its factory settings.
• Erase /cache only: Erases the cache partition of the device that is primarily used to
store recovery logs and temporary files.
• Erase /data only: Erases the data stored on the device.
• Swap memory banks: Swaps the boot banks on the device so the primary boot bank
becomes the secondary boot bank. Avaya Vantage
- Current firmware. Avaya Vantage
- Previously installed firmware. This firmware is updated every time the firmware on the
device is upgraded.
• Force SELinux Permissive mode: Starts the system with SELinux in Permissive mode.
When Permissive mode is enabled, the SELinux security policy is disabled, but the
system still logs all events related to the security policy.
September 2018
™
starts the boot recovery procedure and displays a list of options.
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
™
always has 2 copies of firmware:
™
uses this firmware to boot up.
™
98