Avaya Vantage K175 Installing And Administering page 149

TLS
Parameter
TLSSRVRID
TLS_VERSION
LLDP
Parameter
LLDP_ENABLED
September 2018
Type Default Is set to
value default
on reset
Integer 1 Yes
Numeric 1 Yes
Type Default Is set to
value default
on reset
Integer 1 Yes
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Other operational parameters and settings
Description
Specifies whether the TLS server identification is
required. Assign one of the following values:
• 0: Certificate validation is not required. TLS
connection is established in all cases.
• 1: Certificate match required. TLS connection is
established only if the server identity matches the
servers certificate.
This parameter is supported in all modes.
For provisioning, use:
• DHCP option 43.
• The SET command in the 46xxsettings.txt
file.
Specifies which TLS versions are supported with all
TLS connections used by Android and Avaya
applications. Assign one of the following values:
• 0: TLS versions 1.0 and 1.2 are supported.
• 1: TLS version 1.2 only is permitted.
Note:
Before upgrading to Release 1.1 or 2.0, you
must verify that the TLS version 1.2 is enabled
on the HTTP/S file server if HTTP/S is used.
Otherwise, the device cannot download
configuration and image files from the HTTP/S
file server.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Description
Specifies whether LLDP is enabled. Assign one of
the following values:
• 0: Disabled.
• 1: Enabled.
™
149